flectra/doc/setup/install.rst

:banner: banners/flectra_installing.jpg

.. _setup/install:

==================
Installing Flectra
==================

There are mutliple ways to install Flectra, or not install it at all, depending
on the intended use case.

This documents attempts to describe most of the installation options.

:ref:`setup/install/packaged`
    Suitable for testing Flectra, developing modules and can be used for
    long-term production use with additional deployment and maintenance work.

:ref:`setup/install/source`
    Provides greater flexibility:  e.g. allow multiple running Flectra versions on
    the same system. Good for developing modules, can be used as base for
    production deployment.

:ref:`setup/install/docker`
    If you usually use docker_ for development or deployment, an official
    docker_ base image is available.

.. _setup/install/packaged:

Packaged installers
===================

Flectra provides packaged installers for Windows, deb-based distributions
(Debian, Ubuntu, …) and RPM-based distributions (Fedora, CentOS, RHEL, …) for
the Community versions.

These packages automatically set up all dependencies,but may be difficult
to keep up-to-date.

Windows
-------

* Download the installer from our Community only
  or the Windows installer from the Download_ page (any edition)
* Run the downloaded file

  .. warning:: on Windows 8, you may see a warning titled "Windows protected
               your PC". Click :guilabel:`More Info` then
               :guilabel:`Run anyway`

* Accept the UAC_ prompt
* Go through the various installation steps

Flectra will automatically be started at the end of the installation.

Linux
-----

Debian/Ubuntu
'''''''''''''

Flectrahq 'deb' package currently supports `Debian Stretch`_, `Ubuntu Xenial`_,
`Ubuntu Zesty`_ and `Ubuntu Artful`_.

Prepare
^^^^^^^

Flectra needs a `PostgreSQL`_ server to run properly. The default configuration for
the Flectra 'deb' package is to use the PostgreSQL server on the same host as your
Flectra instance. Execute the following command as root in order to install
PostgreSQL server :

.. code-block:: console

  # apt-get install postgresql -y

In order to print PDF reports, you must install wkhtmltopdf_ yourself:
the version of wkhtmltopdf_ available in debian repositories does not support
headers and footers so it can not be installed automatically.
The recommended version is 0.12.1 and is available on `the wkhtmltopdf download page`_,
in the archive section.

Repository
^^^^^^^^^^

Flectra provides a repository that can be used with  Debian and Ubuntu
distributions. It can be used to install Flectra by executing the following
commands as root:

.. code-block:: console

    # wget -O - https://flectrahq.com/flectra.key | apt-key add -
    # echo "deb https://download.flectrahq.com/1.0/pub/deb/ ./" >> /etc/apt/sources.list.d/flectra.list
    # apt-get update && apt-get install flectra

You can then use the usual ``apt-get upgrade`` command to keep your installation up-to-date.

Deb Package
^^^^^^^^^^^

Instead of using the repository as described above, the 'deb' package can be
downloaded here:

* Community Edition: `flectrahq`_

You can then use ``gdebi``:

.. code-block:: console

    # gdebi <path_to_installation_package>

Or ``dpkg`` (handles less dependencies automatically):

.. code-block:: console

    # dpkg -i <path_to_installation_package> # this probably fails with missing dependencies
    # apt-get install -f # should install the missing dependencies
    # dpkg -i <path_to_installation_package>

This will install Flectra as a service, create the necessary PostgreSQL_ user
and automatically start the server.

.. warning:: The 3 following python packages are only suggested by the Debian package.
             Those packages are not available in Ubuntu Xenial (16.04).

* python3-vobject: Used in calendars to produce ical files.
* python3-pyldap: Used to authenticat users with LDAP.
* python3-qrcode: Used by the hardware driver for ESC/POS

If you need one or all of the packages mentioned in the above warning, you can install them manually.
One way to do it, is simply using pip3 like this:

.. code-block:: console

    $ sudo pip3 install vobject qrcode
    $ sudo apt install libldap2-dev libsasl2-dev
    $ sudo pip3 install pyldap

.. warning:: Debian 9 and Ubuntu do not provide a package for the python module
             num2words.
             Textual amounts will not be rendered by Flectra and this could cause
             problems with the "l10n_mx_edi" module.

If you need this feature, you can install the python module like this:

.. code-block:: console

    $ sudo pip3 install num2words

Fedora
''''''

FlectraHQ 'rpm' package supports Fedora 26.
As of 2017, CentOS does not have the minimum Python requirements (3.5) for
Flectra 1.0.

Prepare
^^^^^^^
Flectra needs a `PostgreSQL`_ server to run properly. Assuming that the 'sudo'
command is available and configured properly, run the following commands :

.. code-block:: console

    $ sudo dnf install -y postgresql-server
    $ sudo postgresql-setup --initdb --unit postgresql
    $ sudo systemctl enable postgresql
    $ sudo systemctl start postgresql

In order to print PDF reports, you must install wkhtmltopdf_ yourself:
the version of wkhtmltopdf_ available in debian repositories does not support
headers and footers so it can not be installed automatically.
The recommended version is 0.12.1 and is available on `the wkhtmltopdf download page`_,
in the archive section.

Repository
^^^^^^^^^^

Flectra provides a repository that can be used with the Fedora distibutions.
It can be used to install Flectra Community Edition by executing the following
commands:

.. code-block:: console

    $ sudo dnf config-manager --add-repo=https://download.flectrahq.com/1.0/pub/rpm/flectra_1.0.latest.noarch.rpm
    $ sudo dnf install -y flectra
    $ sudo systemctl enable flectra
    $ sudo systemctl start flectra

RPM package
^^^^^^^^^^^

Instead of using the repository as described above, the 'rpm' package can be
downloaded here:

* Community Edition: `flectrahq_rpm`_

Once downloaded, the package can be installed using the 'dnf' package manager:

.. code-block:: console

    $ sudo dnf localinstall flectra_1.0.latest.noarch.rpm
    $ sudo systemctl enable flectra
    $ sudo systemctl start flectra

.. _setup/install/source:

Source Install
==============

The source "installation" really is about not installing Flectra, and running
it directly from source instead.

This can be more convenient for module developers as the Flectra source is
more easily accessible than using packaged installation (for information or
to build this documentation and have it available offline).

It also makes starting and stopping Flectra more flexible and explicit than the
services set up by the packaged installations, and allows overriding settings
using :ref:`command-line parameters <reference/cmdline>` without needing to
edit a configuration file.

Finally it provides greater control over the system's set up, and allows more
easily keeping (and running) multiple versions of Flectra side-by-side.

Prepare
-------

Source installation requires manually installing dependencies:

* Python 3.5+.

  - on Linux and OS X, using your package manager if not installed by default

    .. note:: on some system, ``python`` command refers to Python 2 (outdated)
              or to Python 3 (supported). Make sure you are using the right
              version and that the alias ``python3`` is present in your
              :envvar:`PATH`

  - on Windows, use `the official Python 3 installer
    <https://www.python.org/downloads/windows/>`_.

    .. warning:: select "add python.exe to Path" during installation, and
                 reboot afterwards to ensure the :envvar:`PATH` is updated

    .. note:: if Python is already installed, make sure it is 3.5 or above,
              previous versions are not compatible with Flectra.

* PostgreSQL, to use a local database

  After installation you will need to create a postgres user: by default the
  only user is ``postgres``, and Flectra forbids connecting as ``postgres``.

  - on Linux, use your distribution's package, then create a postgres user
    named like your login:

    .. code-block:: console

        $ sudo su - postgres -c "createuser -s $USER"

    Because the role login is the same as your unix login unix sockets can be
    use without a password.

  - on OS X, `postgres.app <http://postgresapp.com>`_ is the simplest way to
    get started, then create a postgres user as on Linux

  - on Windows, use `PostgreSQL for windows`_ then

    - add PostgreSQL's ``bin`` directory (default:
      ``C:\Program Files\PostgreSQL\9.4\bin``) to your :envvar:`PATH`
    - create a postgres user with a password using the pg admin gui: open
      pgAdminIII, double-click the server to create a connection, select
      :menuselection:`Edit --> New Object --> New Login Role`, enter the
      usename in the :guilabel:`Role Name` field (e.g. ``flectra``), then open
      the :guilabel:`Definition` tab and enter the password (e.g. ``flectra``),
      then click :guilabel:`OK`.

      The user and password must be passed to Flectra using either the
      :option:`-w <flectra-bin -w>` and :option:`-r <flectra-bin -r>` options or
      :ref:`the configuration file <reference/cmdline/config>`

* Python dependencies listed in the :file:`requirements.txt` file.

  - on Linux, python dependencies may be installable with the system's package
    manager or using pip.

    For libraries using native code (Pillow, lxml, greenlet, gevent, psycopg2,
    ldap) it may be necessary to install development tools and native
    dependencies before pip is able to install the dependencies themselves.
    These are available in ``-dev`` or ``-devel`` packages for Python,
    Postgres, libxml2, libxslt, libevent, libsasl2 and libldap2. Then the Python
    dependecies can themselves be installed:

    .. code-block:: console

        $ pip3 install -r requirements.txt

  - on OS X, you will need to install the Command Line Tools
    (``xcode-select --install``) then download and install a package manager
    of your choice (homebrew_, macports_) to install non-Python dependencies.
    pip can then be used to install the Python dependencies as on Linux:

    .. code-block:: console

        $ pip3 install -r requirements.txt

  - on Windows you need to install some of the dependencies manually, tweak the
    requirements.txt file, then run pip to install the remaning ones.

    Install ``psycopg`` using the installer here
    http://www.stickpeople.com/projects/python/win-psycopg/

    Then use pip to install the dependencies using the following
    command from a cmd.exe prompt (replace ``\YourFlectraPath`` by the actual
    path where you downloaded Flectra):

    .. code-block:: doscon

        C:\> cd \YourFlectraPath
        C:\YourFlectraPath> C:\Python35\Scripts\pip.exe install -r requirements.txt

* *Less CSS* via nodejs

  - on Linux, use your distribution's package manager to install nodejs and
    npm.

    .. warning::

        In debian wheezy and Ubuntu 13.10 and before you need to install
        nodejs manually:

        .. code-block:: console

            $ wget -qO- https://deb.nodesource.com/setup | bash -
            $ apt-get install -y nodejs

        In later debian (>jessie) and ubuntu (>14.04) you may need to add a
        symlink as npm packages call ``node`` but debian calls the binary
        ``nodejs``

        .. code-block:: console

            $ apt-get install -y npm
            $ sudo ln -s /usr/bin/nodejs /usr/bin/node

    Once npm is installed, use it to install less:

    .. code-block:: console

        $ sudo npm install -g less

  - on OS X, install nodejs via your preferred package manager (homebrew_,
    macports_) then install less:

    .. code-block:: console

        $ sudo npm install -g less

  - on Windows, `install nodejs <http://nodejs.org/download/>`_, reboot (to
    update the :envvar:`PATH`) and install less:

    .. code-block:: doscon

        C:\> npm install -g less

Fetch the sources
-----------------

There are two ways to obtain the Flectra source code: zip or git.

* Flectra zip can be downloaded from  our flectrahq_ server or our flectrahq_zip_  page,
  the zip file then needs to be uncompressed to use its content

* gitlab allows simpler update and easier switching between different versions
  of Flectra. It also simplifies maintaining non-module patches and
  contributions.  The primary drawback of git is that it is significantly
  larger than a tarball as it contains the entire history of the Flectra project.

Running Flectra
---------------

Once all dependencies are set up, Flectra can be launched by running ``flectra-bin``.

:ref:`Configuration <reference/cmdline>` can be provided either through
:ref:`command-line arguments <reference/cmdline>` or through a
:ref:`configuration file <reference/cmdline/config>`.

Common necessary configurations are:

* PostgreSQL host, port, user and password.

  Flectra has no defaults beyond
  `psycopg2's defaults <http://initd.org/psycopg/docs/module.html>`_: connects
  over a UNIX socket on port 5432 with the current user and no password. By
  default this should work on Linux and OS X, but it *will not work* on
  windows as it does not support UNIX sockets.

* Custom addons path beyond the defaults, to load your own modules

Under Windows a typical way to execute flectra would be:

.. code-block:: doscon

    C:\YourFlectraPath> python3 flectra-bin -w flectra -r flectra --addons-path=addons,../mymodules --db-filter=mydb$

Where ``flectra``, ``flectra`` are the postgresql login and password,
``../mymodules`` a directory with additional addons and ``mydb`` the default
db to serve on localhost:7073

Under Unix a typical way to execute flectra would be:

.. code-block:: console

    $ ./flectra-bin --addons-path=addons,../mymodules --db-filter=mydb$

Where ``../mymodules`` is a directory with additional addons and ``mydb`` the
default db to serve on localhost:7073

Virtualenv
----------

Virtualenv_ is a tool to create Python isolated environments because it's
sometimes preferable to not mix your distribution python modules packages
with globally installed python modules with pip.

This section will explain how to run Flectra in a such isolated Python environment.

Here we are going to use virtualenvwrapper_ which is a set of shell scripts that
makes the use of virtualenv easier.

The examples below are based on a Debian 9 distribution but could be adapted on
any platform where virtualenvwrapper_ and virtualenv_ are able to run.

This section assumes that you obtained the Flectra sources from the zip file or the
git repository as explained above. The same apply for postgresql installation
and configuration.

Install virtualenvwrapper
'''''''''''''''''''''''''

.. code-block:: console

  $ sudo apt install virtualenvwrapper
  $ source /usr/share/virtualenvwrapper/virtualenvwrapper.sh

This will install virtualenvwrapper_ and activate it immediately.
Now, let's install the tools required to build Flectra dependencies if needed:

.. code-block:: console

  $ sudo apt install build-essential python3-dev libxslt-dev libzip-dev libldap2-dev libsasl2-dev

Create an isolated environment
''''''''''''''''''''''''''''''

Now we can create a virtual environment for Flectra like this:

.. code-block:: console

  $ mkvirtualenv -p /usr/bin/python3 flectra-venv

With this command, we ask for an isolated Python3 environment that will be named
"flectra-env". If the command works as expected, your shell is now using this
environment. Your prompt should have changed to remind you that you are using
an isolated environment. You can verify with this command:

.. code-block:: console

  $ which python3

This command should show you the path to the Python interpreter located in the
isolated environment directory.

Now let's install the Flectra required python packages:

.. code-block:: console

  $ cd your_flectra_sources_path
  $ pip install -r requirements.txt

After a little while, you should be ready to run flectra from the command line as
explained above.

When you you want to leave the virtual environment, just issue this command:

.. code-block:: console

  $ deactivate

Whenever you want to work again with your 'flectra-venv' environment:

.. code-block:: console

  $ workon flectra-venv

.. _setup/install/docker:

Docker
======

The full documentation on how to use Flectra with Docker can be found on the
offcial Flectra `docker image <https://hub.docker.com/r/flectrahq/flectra/>`_ page.

.. _docker: https://www.docker.com
.. _Debian Stretch: https://www.debian.org/releases/stretch/
.. _Ubuntu Xenial: http://releases.ubuntu.com/16.04/
.. _Ubuntu Zesty: http://releases.ubuntu.com/17.04/
.. _Ubuntu Artful: http://releases.ubuntu.com/17.10/
.. _EPEL: https://fedoraproject.org/wiki/EPEL
.. _PostgreSQL: http://www.postgresql.org
.. _the official installer:
.. _install pip:
    https://pip.pypa.io/en/latest/installing.html#install-pip
.. _PostgreSQL for windows:
    http://www.enterprisedb.com/products-services-training/pgdownload
.. _Quilt: http://en.wikipedia.org/wiki/Quilt_(software)
.. _saas: https://www.flectra.com/page/start
.. _the wkhtmltopdf download page: https://github.com/wkhtmltopdf/wkhtmltopdf/releases/tag/0.12.1
.. _UAC: http://en.wikipedia.org/wiki/User_Account_Control
.. _wkhtmltopdf: http://wkhtmltopdf.org
.. _pip: https://pip.pypa.io
.. _macports: https://www.macports.org
.. _homebrew: http://brew.sh
.. _wheels: https://wheel.readthedocs.org/en/latest/
.. _virtualenv: https://pypi.python.org/pypi/virtualenv
.. _virtualenvwrapper: https://virtualenvwrapper.readthedocs.io/en/latest/
.. _pywin32: http://sourceforge.net/projects/pywin32/files/pywin32/
.. _the repository: https://gitlab.com/flectra-hq/flectra
.. _git: http://git-scm.com
.. _Editions: https://www.flectra.com/pricing#pricing_table_features
.. _extra: https://download.flectrahq.com/1.0/pub/
.. _flectrahq_rpm: https://download.flectrahq.com/1.0/pub/rpm/
.. _Download: https://download.flectrahq.com/
.. _flectrahq_zip: https://download.flectrahq.com/1.0/pub/src/flectra_1.0.latest.zip
.. _flectrahq: https://download.flectrahq.com/1.0/pub/deb/flectra_1.0.latest_all.deb